News

DCE Unicell Replacement Filters

Replacement Dust Collector FiltersReplacement Dust Collector CartridgesReplacement DCE Unicell and Other Dust Collector Filters

Filquip offers a range of filter cartridges for almost any collector unit including the DCE Unicell Replacement Filters. Filquip can manufacture filter cartridges to provide a solution to any cartridge filter problem. We pride ourselves on being able to deliver filtration solutions for the dirtiest, stickiest, hottest and nastiest products.

  • Snap ring, Bottom screw-in, Standard plain end, Flanged plain end, Tri-lobe style top cap options available.
  • Metal, Polymer/plastic cap and Moulded base matching pleat bottom cap options available.
  • HEPA filters and HVAC general filters available.

Some of the replacement dust collector filters we manufacture and stock are compatible with:

  • DCE Unicell Replacement Filters.
  • Dustcotech replacement filters.
  • Clyde-Apac replacement filter cartridges.
  • Air Systems dust collector replacement filters.
  • DCS Filters.
  • Consonic Dust Filters.
  • Colortronic Filters.Replacement Torit Filter CartridgeTri-lobe Replacement Filter Cartridge
  • Mix Dust Collector Cartridges.
  • DCE Siloair Replacement Cartridges.
  • DCE Torit dust collector replacement filters.
  • Camfill Torit dust collector replacement filters.
  • Fowler Rex dust collector replacement filters.
  • WAM Dust Collector Cartridges.
  • Sigrist replacement cartridges.
  • Scutti replacement filters.
  • Nederman replacment filters.
  • Tylden Filter Replacements.
  • Micropul Filter Replacements.
  • Moreflo Filter Cartridges.
  • Van Aalst replacement cartridges.

General enquiries and challenges to find solutions to dust collector and bag house problems are welcomed.

Ordering Your Cartridges

In Stock Screw Conveyors

IN STOCK SCREW CONVEYORS IN AUSTRALIA : PRE-FABRICATED READY TO GO

In Stock ES Screw Conveyor

 

 

 

 

 

Filquip and WAM are now holding stock in Australia of the sought-after ES series screw conveyor range primarily used for conveying cement, fly ash and lime. The regular diameters of 114, 168, 219, 273 and 323mm are warehoused in Melbourne ready for order in 12-meter configurations. These configurations comprise of 3 – 4 sections (tabled below) and are adaptable to different lengths by removing internal sections. Should these lengths still not suit the application we can provide the exact length required delivered in standard lead times from placement of order.

Dimensions for in stock screw conveyors

 

 

 

 

 

 

 

 

 

The 168mm to 323mm in stock screw conveyors come with a universal inlet and outlet allowing you to achieve an angle of inline from 0 degrees right through to 45 degrees.

Specifications for in stock screw conveyors

 

 

 

 

 

 

Open Tubular Screw Conveyors Brochure

240V Electric Vibrators

OLI Vibrators now manufactures and distributes the Visam 240V electric vibrators product range. This has enabled Filquip to provide larger electric motovibrators in the sought-after single phase (240 volt) range.

Our 240 Volt vibrators have been produced with a centrifugal force range of 4 kg of 321 kg. While the Visam product offers four larger models with maximum centrifugal forces of 500kg, 800kg, 1000kg & 1350kg all with IP66 mechanical protection rating.

Open Visam Electric Vibrators Datasheets

240V Electric Vibrators

Dust Extractors

Filquip is a bulk materials handling equipment supplier with specialist experience in industrial dust extractors. As the Queensland distributor and agent for WAM and their patented dust extraction systems which are renowned worldwide Filquip can provide systems from small hopper dust vents to large quarry crusher dust extraction systems.

  • Industrial and Food Grade Dust Extraction Systems specific to suit the needs of your plant, including hazardous area rated dust extraction units.
  • Modular and fixed systems available
  • Design, Supply, Installation and Commissioning of Dust Extraction systems or any of these steps individually.
  • Filquip can supply dust filter bags or cartridges for almost any existing system.

We pride ourselves on being able to deliver dust extraction solutions for the dirty, sticky, hot and difficult dust problems.

View the Filquip Dust extractors Page

Filquip Dust Extractors

 

 

 

High Flow Bulk Bag Unloader HFF

The addition of the new SBB-HFF series of bulk bag unloaders to the Filquip range brings a new level of reliability in bulk bag decanting. Since 1969 Extract have been innovating their designs and the new High Flow Bulk Bag Unloader HFF series provide Bulk Bag Unloading using their integrated bag massaging system with control panel.

  • Available in half frame or full frame forklift loaded models, or in a integrated crane and monorail model.
  • Available in Carbon steel, Stainless steel 304 and Stainless steel 316
  • Every unit comes with Certified Bulk Bag Lifting Cross with 2000kg SWL.
  • Includes electrical vibrator, level probe point and dust collection point to ensure efficient and clean bulk bag unloading.
  • Lockable access hatch for Bag neck tie opening with option for door interlock switch
  • Available with bag splitting knives.
  • Available in 1,250mm or 1,500mm diameter cones for different sizes bag and holding requirements

Open SBB-HFF High Flow Bulk Bag Unloader Brochure

FIBC Unloader Models

 

 

Bulk Bag Unloader

Compressed Air Driven Concrete Poker

Filquip is proud to present the newest product to its concrete consolidation range of vibration equipment, the VHA High Frequency Compressed Air Driven Concrete Poker.

Fresh concrete does not compact and release air bubbles trapped within the mix without vibration. Filquip supplies a range of Compressed Air Driven Concrete Pokers also known as Needles to overcome the poor fluidity and internal friction within the fresh concrete to release the air bubbles and compact the concrete mix.

The VHA Series of high frequency pneumatic concrete pokers operate on compressed air at 6bar to provide a high working efficiency under safe conditions.

  • 100% Waterproof
  • Free from electricity – Safe to operate
  • Available in 40mm, 50mm, 60mm, 80mm and 105mm diameter poker heads.
  • VHA range comes with 2m SBR rubber hose (Optional up to 6m length available)
  • Quick Connect Fittings and filter included
  • Eccentric Rotor Vibration Generation with no moving parts in the hose
  • No moving parts in the hose = Maintenance Free Operation
  • No moving parts in the hose = Less vibration on the hands and arms of the operator
  • Can work out of concrete without overheating

Open OLI VHA Pneumatic Concrete Pokers Datasheet

Compressed Air Concrete NeedleCompressed Air Concrete Pokers

 

 

 

 

 

Industrial Vacuum Cleaners

Our Filquip / RGS  industrial vacuum cleaners are suitable for general cleaning in industrial environments and premises. Built to handle vacuuming of wet and dry products the One range of units are Practical, Easy to handle and Quiet in operation. The design of the whole unit has been economised to reduced dimensions in order to meet the space requirements of operation in industrial premises and for storage.

Our flagship One32 model has the following features:

  • 2 x 1.1kW 240V Motors with double stage by-pass
  • Machine body Ø460mm
  • Special Motor Head Cover made from moulded ABS
  • Vacuum-meter to monitor filter efficiency
  • Manual filter shaker on top of the vacuum for simple cleaning
  • Dust bin of 39L or 65L included with handle and castor
  • Rear wheels Ø150mm, front wheels Ø125mm with brake
  • Available in Standard Version and Stainless Steel Version

Open ONE32 Industrial 240V Vacuum Cleaners Brochure

Ceiling and Beams Industrial Cleaning System RGSFireplace Industrial Vacuum Cleaning System RGS240V Vacuum CleanerIndustrial Vacuum Cleaners

 

 

 

Modular Lime Dosing System

Modular Lime Dosing System

Filquip has developed a modular Lime Dosing Package of equipment for simple setup and operation. The Filquip Modular Lime Dosing System consists of the following key components:

  • Telescopic Bulk Bag Unloading System with 304 Stainless Steel storage hopper.
  • Slide gate valve for lime powder isolation.
  • Bulk Bag Unloader Vibrators and Aerators for optimal Lime powder flow.
  • TX Stainless Steel 304 Screw Conveyor 2.8m long at 45Deg incline.
  • Dust Extraction System for Bulk Bag Unloading with integrated Rotary valve to return the dust into the Screw conveyor.
  • Stainless Steel 304 Mixing Tank with 0.55kW Mixer, Access Hatches, Level Sensor and Lime Slurry Outlet Process Connections.

Filquip lime dosing systems are also available on a forkliftable skid frame with integrated control panel for a fully mobile Lime Dosing Solution.

Open the Modular Lime Dosing System Case Study

Our Lime Dosing Systems are constructed using Quality Italian Equipment designed and developed for Lime Dosing. Visit the WAM Lime Dosing Page.

Lime Unloading and Dosing SystemLime Mixing Tank Stainless Steel

Pharmaceutical Pneumatic Conveying

Air-Tec Systems the Filquip partner for Dense Phase Conveying Technology Dense Phase Conveying for Pharmaceuticalhave a proven record in delivering extremely high quality pharmaceutical pneumatic conveying systems. Air-Tec has just delivered a batch of fully mirror finish electropolished 316 Stainless Steel Dense Phase Vessels to ACS Dobfar in Italy.

System 1 is to convey the pharmaceutical antibiotic products from a sealed hand break station to the batch reactor.
System 2 is to convey the pharmaceutical products from a sealed hand break station to the product grinder.
These Dense Phase Conveying Systems transfer the products with inert nitrogen in a closed loop process with a flow rate of 0.2 TPH over a distance of 15m.

Some of the advantages of using Filquip & Air-Tec Dense Phase Conveying Systems Include:

  • Fully sealed conveying for the highest level of safety and reduced PPE requirements.
  • Reduction of dust and airbourne particles in the pharmaceutical plant.
  • Reduction in workplace back injuries from reduced lifting and carrying of products.
  • Mirror Electro polish Finish for Hygiene and cleanliness.
  • Dense Phase Conveying maintains the properties of mixtures.

Our pharmaceutical pneumatic conveying systems comply with GMP (good manufacturing practices) standards for the conveying of excipients and pharmaceutical powders in complete safety. The parts that come into contact with the products are made of polished stainless steel; furthermore, cleaning cycles of both the pipes and the conveyor vessel are possible.
The whole system is completely closed in order to ensure a high level of hygiene.

Materials are conveyed at a low speed in order to keep finished products and mixtures in perfect condition. The use of a minimal amount of compressed air ensures considerable cost savings.

Pneumatic conveying systems are also used for the transfer of capsules, pills and tablets due to the reliability of the conveying processes and the hygienic nature of the closed pipeline conveying system.

Our Dense Phase Conveying Systems are constructed using Quality Italian Equipment designed and developed. Visit the Air-Tec Hygenic Dense Phase Systems Page.

Pharmaceutical Pneumatic ConveyingPharmaceutical Dense Phase Conveying

Mobile Dense Phase Conveying Skid

Filquip has developed a mobile dense phase conveying skid solution for  pneumatic conveying of cement, silica fume, salt and other building material plant additives. The mobile skid contains all of the equipment required for conveying the products, all that is required is a compressed air connection by Nitto hose and 240V power.

The mobile dense phase conveying skid can fill Silos, Hoppers and Bins up to 30m tall at rates up to 1T/hour.

Mobile Dense Phase Conveyor Skid